Checking the installation at each stage makes it easier to pinpoint the cause of problems should they occur. Remove the four mounting screws on each fan and remove the fans from the tray. To Remove Boards from the Motherboard 1. Insert the new fans in the same locations and orientations at the old fans. The following options are available from the Functions menu: When you power on the ColorPASS, let the Start-up diagnostics complete, then power off and on again to reinitialize the realtime clock.
|Date Added:||17 September 2018|
|File Size:||11.23 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
All service persons are expected to have a good understanding of the contents of this Service Manual and colopass relevant Service Information bulletins and be able to identify and isolate faults in the machine. Red laser pointers with presentation functions. To Remove The Hdd See the Configuration Guide for more information.
Align the CPU fan with the heatsink. If a ribbon cable is suspect, substitute it with a tested cable. For information on error messages, see the Printing Guide.
More ways to shop: See “Verifying the connection” on page Probable cause UIB cable connection to the top panel is faulty. Problems may occur in one of three areas: When you power on the ColorPASS, let the Start-up diagnostics complete, then power off and on again to reinitialize the realtime clock.
Save a copy of any custom simulations before installing so they can be restored. Before you conclude that any board or component has failed, remove, inspect, and reseat all appropriate connections, and then verify that the problem still occurs.
Do not unscrew the six screws on the rounded side colorpasx the HDD. The Cankn is also used to store spooled print jobs. Use caution when lifting up the clip; excessive force could cause the clip to lose its tension. Token Ring compatibility is available with the optional Token Ring kit see the documentation included with that kit for more information.
Then check the other components as suggested in the following tables. Remove the HDD and place it on an antistatic surface.
With a phone call you can find out if the problem is a simple operating failure or a failure caused by a network or configuration change. Lift colorpads lever to release the CPU from the socket see F Approved DIMMs are available from your service representative.
The Ethernet board is installed in motherboard connector PCI5.
Canon Colorpass Z40e | 40 – Detailed Copier Specifications
Insert the new CPU so that the colorpase on the chip lines up with the notch area on the socket. The connectors on the boards are keyed to fit only one way on the motherboard. Grasp the board at the front and back edge and gently pull the board straight out of its connector on the motherboard.
A special character appears in the display window next to a button when it is available.
Canon ColorPASS Z40e
Special tool 1 Wrist strap Tool No. This chapter includes information on servicing the following components: System Software Service Disconnect the UIB cable from the top panel.
To Restore Backup System Software It’s a community-based project which helps to repair anything. Grasp the board at the front and back edge and gently pull it straight out of its connector on the motherboard. High-speed DIMMs dual in-line memory modules on the motherboard hold the image data during printing.